[[ImgSrc-search]]
Contact Us
TEL: +86-774-5298182
Fax: +86-774-5280555
E-mail: sales@unisun-stone.com
Address: No.6 Tianhe Road, Pinggui Industrial Area, Hezhou, Guangxi, China
Home > News > Content
How To Process Ultra-thin Stone
May 31, 2018

    How to process ultra-thin stone

timg.jpg


    With the widespread use of ultra-thin stone materials, the demand for ultra-thin stone materials is increasing. The processing methods for ultra-thin stone materials are also coming into sight. After the ultra-thin stone has undergone technical processing, it can be more flexible applied to all kinds of renovated buildings. Take a look today and see how the ultra-thin stone is processed.


  Ultra-thin stone processing


  1, preparation before processing. Ultra-thin, stone processing is generally used in the frame saw and diamond disc saw for processing, and using these two methods, it will produce greater flatness and thickness error. Therefore, before processing it, it must first be subjected to thickness and polishing. After cutting it into the required specifications, the ultra-thin stone cutting process can be performed.


  2, processing equipment selection. According to different processing requirements, the choice of processing equipment is also different. For example, for the ultra-thin processing of marble stone, the diamond band saw processing equipment is generally used. The marble can be cut into various types of plates and the thickness of the cut can be as thin as 2 mm. The processing of granite ultra-thin stone can not use diamond band saw processing equipment, which is generally a single-chip diamond disc saw.


  3, thickness calculations. After selecting suitable processing equipment according to the specifications of the ultra-thin stone, trial cutting is first performed to measure the incision width. Then according to the requirements of the selected thickness of the engineering board, calculate the thickness of the cut sheet.


  4. After the thickness of the ultra-thin stone is calculated, the super-thin stone can be placed in the processing equipment for processing.


  Ultra-thin stone processing method


  (1) The processing of three-dimensional special-shaped stone, special-shaped stone processing mainly refers to the processing of stone carvings, door and window covers, vases, etc. The processing methods are mainly boring, boring, grinding, shoveling, chiseling, drilling, etc., and can be used manually. Processing, available machining.


  (2) Flat profile stone. Such as kitchen cabinets countertops, desktops, etc., its processing methods are mainly through cutting, grinding, polishing and other methods to produce.


  (3) Surface sheet processing. For example, the machining of cylindrical and arc-shaped plates is a processing of curved plate materials. The main processing method is machining with machine equipment.